Components
All the smaller pieces that keep your system reliable. From magnets and level controls to valves, flow aids, crushers, elbows, and precision weighing, we size and supply trusted brands for your process.
Need help choosing?
Tell us your material, line size/flow, temperature, pressure, and sanitation needs—our engineers will recommend the right component and connections.
Magnets
Industrial Magnetics’ full line: gravity, pneumatic, liquids, belt-conveyed, and recycling.
Tramp Metal & Separation Magnets
Drawer, grate, plate & hump magnets, pneumatic line traps, T-Traps, drums, pulleys, overheads.
Drawer-In-Housing (Round)
Compact round-body drawer magnet for sanitary and plastics applications.
Pneumatic Line Housing
Rare-earth tubes for dilute phase conveying with EZ/Self-Clean options.
Key Features
- UHI-52™ rare-earth circuits for fines and weakly magnetic stainless
- EZ-Clean & Self-Clean options to reduce downtime
- Food Grade & Sanitary finishes; Hydex® wipers; Nedox® coatings
Applications
- Food & beverage, plastics/resins, chemicals, minerals
- Recycling & metal recovery; aggregate protection
- Equipment protection ahead of mills, screens & detectors
Why choose Industrial Magnetics?
- Deep product range with proven circuits and cleanability options
- Custom transitions (round↔square), flanges, and retrofit support
- Strong documentation and lifecycle support
Keep Exploring
See details, selection tips, and FAQs on our Magnet Solutions page →
Level Controls & Process Sensors
Point & continuous level, dust/flow monitoring, and mass flow measurement.
Monitor Technologies
Rotaries, RF admittance, dust monitors, solids flow switches, and mass flow.
SiloPatrol® Plumb Bob
Continuous level measurement for powders and granular solids.
SafePoint® Level Sensor
Fail-safe rotary paddle switch for point level detection.
Key Features
- Technologies for powders, pellets, and liquids (point + continuous)
- Fail-safe designs and hazardous-location options
- Dust, flow, and mass-flow monitoring for compliance & control
Applications
- Silos, bins, day hoppers, conveyors & transfer points
- Food, plastics, cement/minerals, chemicals
- Baghouses & dust collection (emissions monitoring)
Why choose Monitor Technologies?
- Broad portfolio with proven reliability across industries
- Application-driven guidance & strong support materials
- Integration-friendly outputs for PLC/SCADA
Keep Exploring
See technology selection guides and wiring tips on our Level Controls page →
| Type | Measurement | Best For | Advantages | Notes |
|---|---|---|---|---|
| Rotary Paddle (SafePoint®) | Point | Powders & granular solids in bins/hoppers | Simple, cost-effective, fail-safe design | Set paddle style by bulk density |
| RF Admittance | Point | Sticky/coating materials | Ignores buildup with driven-shield probes | Great in food & chemicals |
| SiloPatrol® Plumb Bob | Continuous | Most powders/pellets; tall silos | Reliable, not affected by dust | Works where radar/ultrasonic struggle |
| Ultrasonic / Radar (guided) | Continuous | Liquids & some solids | Non-contact options; fast response | Watch for dust/foam with ultrasonic |
| Dust Monitor / Solids Flow | Condition | Baghouse outlets, ducts, chutes | Emission detection & flow confirmation | Useful for compliance alarms |
Slide/Knife Gates & Valves
Robust isolation and flow control for powders, granules, and slurries.
Orbinox Knife Gate Valves
Resilient/metal-seated valves with purge ports and custom face-to-face options.
Bray Butterfly Valves
Resilient-seated butterfly valves with manual, pneumatic, or electric actuation.
Key Features
- Knife gates for abrasive slurries & bulk solids isolation
- Butterfly valves for compact, economical throttling
- Manual or automated actuation; sanitary options available
Applications
- Powder handling, pneumatic lines, slurry transfer
- Food, plastics, pulp & paper, mining, water/wastewater
Why these brands?
- Orbinox: heavy-duty designs with broad material/seat choices
- Bray: global support; extensive actuation & control accessories
Keep Exploring
See sizing tips and actuator options on our Valves page →
Flow Aids
Keep material moving—eliminate ratholes, bridging, and hang-ups.
Control Concepts Airsweep®
Targeted air pulses to clear material blockages and promote flow.
Solimar® Fluidizers
Food-grade fluidizers to keep powders moving in bins and silos.
VIBCO Vibrators
Pneumatic and electric vibrators for bins, hoppers, feeders & tables.
Key Features
- Precise flow control without over-aeration
- Food-grade and high-temp options
- Low air consumption and easy maintenance
Applications
- Bins, silos, hoppers, chutes & pneumatic receivers
- Powders prone to caking, arching or rat-holing
Why these brands?
- Control Concepts: engineered, pinpoint pulses—fast results
- Solimar: proven food-grade fluidization discs
- VIBCO: wide vibrator catalog, quick ship & support
Keep Exploring
Troubleshooting guides & sizing on our Flow Aids page →
Lump Breakers (Crushers)
Reduce agglomerates and oversize to a manageable, consistent size.
Flow Sentry
Inline crusher for oversize lumps in bulk flow.
Particle Sizer
Precision particle size reduction in bulk solids.
Flow Smasher
Heavy-duty crusher for tough agglomerates.
Key Features
- Inline or gravity-fed designs to suit layout
- Replaceable cutter options; easy maintenance access
- Built for abrasive, hard, and sticky materials
Applications
- Food ingredients, chemicals, fertilizers, minerals
- Conditioning before conveying/feeding or screening
Why Atlantic Coast Crushers?
- Focused on de-lumping and coarse reduction
- Rugged, low-maintenance designs with quick access
- Application support and made-to-order options
Keep Exploring
See selection tips & case studies on our Lump Breakers page →
Load Cells, Scales & Weigh Modules
From tank & hopper weighing to floor scales and precision modules.
Weigh Modules
Rugged compression modules for tanks, silos, and hoppers.
Load Cells
Compression/tension cells and accessories for industrial weighing.
Scales & Indicators
Floor & bench scales with digital indicators and integration options.
Key Features
- Legal-for-trade and industrial options
- Shock-and-vibration-tolerant weigh modules
- Wide accessory ecosystem (mounts, junction boxes, indicators)
Applications
- Tank/hopper batching, inventory, and loss-in-weight
- Shipping/receiving, floor & bench weighing
Why Rice Lake?
- Comprehensive catalog with robust service/support
- Proven modules for vessels and process environments
- Integration-friendly indicators & networking
Keep Exploring
See kits, indicators and wiring on our Weighing & Scales page →
HammerTek® Elbows
Wear-resistant Smart Elbows® that reduce elbow wear, product degradation, and plugging in pneumatic conveying.
Smart Elbow® Deflection Design
Patented deflection zone reduces wear & impact versus long-radius elbows.
Compact Elbow Solutions
Ideal for tight layouts; protects against cable-cutting and leaks.
Installed System Reliability
Proven in abrasive services; lowers maintenance and unplanned outages.
Key Features
- Deflection-action design minimizes direct wall impact
- Available in common sizes and materials (carbon/stainless)
- Reduces angel hair, streamers & fines in plastics
Applications
- Pneumatic conveying of abrasive powders & pellets
- Food, plastics, minerals, chemical plants
| Elbow Type | Angle | Best For | Main Advantages | Notes |
|---|---|---|---|---|
| Smart Elbow® (Standard) | 90° | General pneumatic lines; abrasive solids | Greatly reduced wear & plugging vs. long-radius elbows | Compact footprint eases retrofits |
| Smart Elbow® (Short-turn) | 45° | Tight layouts, direction changes in short runs | Lower product degradation; less angel hair | Use where space or product quality is critical |
Why HammerTek?
- Inventor of the Smart Elbow® with decades of field success
- Lower total cost of ownership in abrasive service
- Strong OEM & retrofit support
Keep Exploring
See more examples and sizing advice on our HammerTek Elbows page →
Need help choosing a component?
Send us your material, environment, and connection details. We’ll size, spec, and quote the right component—fast.
Talk with an Applications Engineer